160 A High Voltage 50 Ω Pulse Generator
Features
- ±4 kV into 50 Ω
- ±160 A into short circuit
- 320 kW into 50 Ω
- Pulse output: high voltage TNC connector
- 6 digital programmable pulse rise times in the ranges:
- 0.2 ns to 50 ns from 0 A to 40 A (40 A mode)
- 1 ns to 50 ns from 0 A to 120 A (160 A mode)
- 1 ns from >120 A to 160 A (160 A mode)
- High speed 50 Ω trigger output for oscilloscopes (synchronous to high voltage pulse output)
- 8 programmable pulse widths: 1 ns to 100 ns (40 A mode), 1 built-in pulse width: 100 ns (160 A mode)
- The optional pulse width extender TLP-3011C enables pulse width up to 1.6 μs in 68 digital programmable steps (0 A to 40 A, 40 A mode)
- Optional external pulse width extensions from 5 ns to 500 ns (0 A to 160 A, 160 A mode) using the external pulse width extender TLP-16012A
- Built-in pulse reflection suppression
- Fast measurement time, typically less than 0.2 s per pulse including one-point DC measurement between pulses
- Efficient software for system control and waveform data management
- The software can control automatic probers for fast measurements of complete wafers
- Combines TLP-16010A and TLP-4010C in one system
- Can be operated together with TLP-16012A and TLP-3011C pulse width extenders
- Integrated interlock safety shut-down
- Industrial isolated and EMI/ESD protected USB control interface
Download: Product Datasheet TLP-16010C
TLP-16010C Front View
TLP-16010C Rear View
Accessories suitcase included with TLP-16010C (typical set)
| Item | Sub-Item | Qty. | Description | Model Number |
| 1 | 1.0 | 1 | TLP/VF-TLP/HMM base unit TLP-16010C | TLP-16010C |
| 1.1 | 1 | High current HMM waveform module HMM-16010A | HMM-12010A | |
| 1.2 | 1 | 3 kV, 9 GHz DUT Switch For TLP-12010A/C Pulser | S-3000DK | |
| 1.3 | 1 | DUT switch control cable 2 m | PCC-200A | |
| 1.4 | 1 | DUT switch control cable 1 m | PCC-100A | |
| 1.5 | 1 | Resistive termination network 500 Ω setup | HIT-526A | |
| 1.6 | 1 | 50 Ω SMA current sensor module 120 A, 3 GHz, 0.5 V/A | ||
| 1.7 | 1 | PCB adaptor | PBA-3002A | |
| 1.8 | 1 | TLP calibration kit for PCB measurements | CAL-KIT-200-A3 | |
| 1.9 | 1 | TLP calibration kit for wafer level measurements | CAL-03A | |
| 1.10 | 1 | SMA wideband pickoff-tee | PT-45A | |
| 1.11 | 1 | 30 kHz – 7 GHz, 10 A DC high current bias tee for TLP/VF-TLP/HMM and charge recovery measurements | ||
| 1.12 | 4 | BNC(m) to SMA(fm) adaptor | BNC(m)/SMA(fm) | |
| 1.13 | 2 | SMA(m)/SMA(m) adaptor | SMA(m)/SMA(m) | |
| 1.14 | 2 | SMA(f)/SMA(f) adaptor | SMA(f)/SMA(f) | |
| 1.15 | 1 | 10 dB, 18 GHz SMA attenuator | 18AH-10 | |
| 1.16 | 1 | 20 dB, 18 GHz SMA attenuator | 18AH-20 | |
| 1.17 | 1 | 2 x 4 mm (m) to BNC(f) adaptor, (Keithley 2400 front-side adaptor) | 2x4mm (m)/BNC(f) | |
| 1.17 | 3 | Flexible RG188A/U SMA(m)/SMA(m) 50 Ohm cable, 2 m, for current sensor and DUT leakage | RG188-2m | |
| 1.18 | 2 | 50 Ohm SMA cable 1 m, Sucoflex 104, for PCB adaptor | SF104−1m | |
| 1.19 | 4 | 50 Ohm SMA cable 2m, Sucoflex 104, for pulse sense/force and vf-TLP delay line | SF104-2m | |
| 1.21 | 1 | Transient voltage suppressor protection for scope input | TVS-70MF-10 | |
| 1.22 | 1 | Power line cable according supply voltage, 150 cm | PLC-150A | |
| 1.23 | 1 | SMA torque wrench | 74Z-0-0-21 | |
| 1.24 | 1 | TLP software (object code) | TLP-GUI-OC | |
| 1.25 | 1 | TLP software manual | TLP-SM | |
| 1.26 | 1 | Hardware manual TLP-12010C | TLP-HM | |
| 1.27 | 1 | Interlock Safety Shut Down (incl.) | TLP-IN-LO | |
| 1.28 | 1 | USB 2.0 Cable A Male to B Male 9.84″ (3.00m) Shielded | 102-1030-BL-F0300 |